So what's this Paintseal all about?
If you were to take a close look at your exterior paint surface, you would see that there are tiny peaks and troughs in the exterior surface. Over time toughened grime and impurities become embedded into to these troughs, in most cases the only way to fully remove this grime is by using abrasive cleaning products. The use of these wear down the exterior surface which leads to the appearance of dull and flat looking paintwork.
What do Paintseal protective coatings do?
When PSA's protective products are professionally applied (by one of our experts) to the exterior of your vehicle, it will fill in those troughs with a unique, tough, transparent layer which bonds to the exterior surface. It leaves a super smooth finish which will protect and lock in the original gloss. Making cleaning so much easier and will enhance the resale value of your caravan, motorhome, boat, car, etc.
So what so special about our products?
The paint sealants that we use here at PSA are either a Ceramic Glasscoat (Gen-3) which sets to a 9H hardness and withstands up to 700 degrees heat or a synthetic fluoropolymer of tetrafluoroethylene or polytetrafluoroethylene (PTFE) which is far more commonly known as Teflon. It gives a stunning shine, as well as dispersing water. Water or oil based products cannot penetrate our products because of the high electro negativity of the fluorine
Paintseal Australia - World Class Paint & Fabric Protection
Keeping your caravan, motorhome, boat, helicopter, private plane, or commercial vehicle clean is both challenging and time consuming. Depending on the cleaning products you would normally use, many of which contain abrasive chemicals required to remove those stubborn marks such as black streaks and tree sap etc. can actually wear the paint surface down and over time leave the exterior finish looking flat.
Your interior fabrics are always subject to threat of staining as a result of an accidental spillage etc. As most interior fabrics are light colours, the stains are always noticeable and off putting. These are very costly to replace.
Why have Paintseal Australia protective products?
Paintseal Australia supply and fit world class GEN-3 Ceramic Glasscoat or a PTFE based sealant for both exterior paint surface and interior fabrics, which seals and protects.
Once applied there is no need for further polishing just easy cleaning to reveal that super glossy look and feel. The interior fabrics are also easy to clean and will resist staining from accidental spillages etc. Paintseal Australia protective sealants are covered by a fully supported Guarantee.
You can get Paintseal Australia protective products by either simply calling our office or fill the booking form out, we will take your order and arrange application at your home address, or if you have just purchased a unit from one of our supporting dealers, then we can arrange to apply the treatment (on site) prior to your collection from the dealer.
Whether you purchase from us direct or through one of our supporting dealers the prices are the same Nationwide, The quality of products used and application is always of the highest standards as only Paintseal Australia specialist team apply the products. Our protective products are not available to purchase as DIY.
NOT ALL PAINT & FABRIC SEALANTS ARE THE SAME!